Name:         Open Transport 
Version:      1.1.1
Released:     October 22, 1996
Description:  Networking software for Mac OS-compatible
computers. For complete information, please see the
documents included with this software.

Path to this software:
  Apple SW Updates
    US
      Macintosh
        Networking-Communications
          Open Transport
            OT 1.1.1
            OT 1.1.1-1of4.sea
            OT 1.1.1-2of4.sea
            OT 1.1.1-3of4.sea
            OT 1.1.1-4of4.sea
            OT 1.1.1-LICENSE
            OT 1.1.1-Net Install.sea

OT 1.1.1 consists of 4 disks:
 
Name as Posted        Actual Disk Name
------------------------------------------
OT 1.1.1-1of4.sea       Install 1
OT 1.1.1-2of4.sea       Install 2
OT 1.1.1-3of4.sea       Install 3
OT 1.1.1-4of4.sea       Install 4

This software is available in two formats (disk images and
"Net Install"):

1.  Four self-extracting archives of Disk Copy 1440K disk
images.  To use, download, double-click the downloaded file
(this decompresses it), and use Disk Copy to create the
disks.  Disk Copy can be found in the Utilities folder
posted here.

2.  A complete Open Transport 1.1.1 "Net Install", which
includes all software from all four Open Transport 1.1.1
disk images.  This posting is provided as a convenience for
those customers who:
- want to download just one file.
- want a pre-configured "Net Install" to place on their hard
drive or on a server.

*********************************************************
PLEASE NOTE:  
You do not need to download the "Net Install" if you have
already downloaded the four separate disk images of
Open Transport 1.1.1.
*********************************************************

From the Read Me included with this software:

For instructions about how to use the Open Transport control
panels (AppleTalk and TCP/IP), see the Open Transport User's
Guide. For additional technical information about Open
Transport, see the "Open Transport Technical Info" file that
came with Open Transport.

This release of Open Transport is subject to the terms and
conditions of the license agreement that accompanies the
software in the file "LICENSE."  By downloading the software
you agree to abide by the terms and conditions of the
license agreement.

Open Transport is designed to work on Mac OS-compatible
computers with a Motorola 68030 or 68040 family
microprocessor, or a PowerPC 601, 603(e), or 604
microprocessor. You should use system software version
7.5.3, 7.5.5 or later with Open Transport, although the
earlier system software versions 7.1, 7.1.1 and 7.1.2
releases are also compatible.

Open Transport 1.1.1 can be used on the Performa and Power
Macintosh 52xx, 53xx, 62xx and 63xx product lines.  When you
install OT1.1.1 on a 52xx, 53xx, 62xx and 63xx model you may
get a dialog box indicating a hardware issue was detected. 
If this alert is displayed, Open Transport cannot be
installed or loaded until the Cache/ROM DIMM is replaced.
Your computer will continue to run classic networking.  The
required repairs are covered under the Apple repair
extension program.  Please contact an Apple-authorized
service provider to have your computer repaired.

Open Transport requires a minimum of 5 MB of RAM (68030 or
68040 computers) or 8 MB of RAM (PowerPC-based computers).
Open Transport memory requirements are based on total system
memory including virtual memory, minus the size of any RAM
disk and disk cache you're using.


Before you install Open Transport 1.1.1
Read the section "Known Limitations and Other Issues" below
to make sure Open Transport 1.1.1 will work on your
computer.  

Make backup copies of the software and documents on your
hard disk (especially your System Folder) before installing
this software.

For best results, you should install Open Transport 1.1.1
over Open Transport 1.1 and not over a beta version of
1.1.1. Several beta test sites have experienced problems
when updating over a beta release. If you choose to install
Open Transport 1.1.1 over a beta version, be sure to copy
and save your prefs file.  

Turn on only those extensions installed with your system
software. (Open the Extensions Manager control panel and
select System 7.5.3 from the Sets pop-up menu, then restart
your computer.)  Do not turn off all extensions before
installing Open Transport.

Performa and Power Macintosh 52xx, 53xx, 62xx and 63xx
models using System 7.5.3 can install Open Transport 1.1.1
directly.  Other supported systems must install Open
Transport 1.1 and system software version 7.1, 7.1.1, 7.1.2
or 7.5.3 before updating to version 1.1.1. 

If you use SLIP or PPP software to access the Internet,
verify that your SLIP or PPP software is compatible with
Open Transport.  See the section under "Dialup network
connectivity - TCP/IP."

When Open Transport is installed, the Network control panel
is replaced by the AppleTalk configuration utility program.
The MacTCP control panel is replaced by the TCP/IP
configuration utility program. Both AppleTalk and TCP/IP are
located in the Control Panels folder. For simplicity and
consistency, user documentation generally refers to
AppleTalk and TCP/IP as "control panels" even though
technically they are utility programs.

You should download a copy of System 7.5, Update 2.0 to
your hard disk or have a copy of the Open Transport 1.1
retail package available.  This will give you the software
to reinstall Open Transport 1.1 in case you decide to remove
Open Transport 1.1.1.  

For additional information, see the documents included with this
software.
